Filter
Top Products
7
INSTALLATION
2
z Inverter with one front cover
(1) Remove the front cover from the inverter. (For removing the front cover, refer to the FR-E700
instruction manual.)
(2) Remove the PU cover from the front cover. Open the PU cover with a driver, etc. and remove it in the
direction of arrow as shown below.
REMARKS
• Because the voltage class, model name and serial (only voltage class is labeled for FR-E740-5.5K (FR-E740-120)
or higher) are stated on the PU cover, replace a PU cover of a plug-in option front cover with the removed PU cover
from the inverter.
(1) Front cover
(2) PU cover
*
* Open the PU cover, then open it toward the arrow
direction to remove.