Filter
Top Products
47
PPO TYPE SUPPORT SPECIFICATION
7
PWE
0 to 15
PNU read value/write value
When command response AK = "7 (command execution error)", PWE definition is as
follows.
16 to 31 Not used (0 is set)
Name Bit Definition
* Indicates outside AK number range, write data error, external operation error, without option
error, instruction code error, with STF error, with STR error, with operation mode specification
error, parameter calibration error (Pr. 900 or later), reset disabled error (with reset input
specification of Pr. 75), etc.
Value Error Definition
0 Invalid PNU
1 Parameter value unchangeable (This error also occurs when Pr.77 = "1"
2 Outside setting range
3 Invalid Sub-Index number
4 Without array
11 No parameter change right
18 Other error *