Filter
Top Products
62
PPO TYPE SUPPORT SPECIFICATION
7.8 Standard parameters
You can use the PNU to make parameter settings from the network.
The table below lists PNU numbers corresponding to parameter numbers.
Standard parameter examples are introduced below. Refer to the examples and make parameter settings.
Refer to the inverter manual for details of the parameters.
Representation of the PNU for standard parameters (Example: Pr.902)
Example of parameter list
Parameter
Number
PNU Name
Minimum
Setting
Increments
Setting Range
Data
Type
Decimal Hexadecimal
0 P1000 Torque boost 0.1% 0 to 30 0 to 12C Us16
1 P1001 Maximum frequency 0.01Hz 0 to 120 0 to 2EE0 Us16
2 P1002 Minimum frequency 0.01Hz 0 to 120 0 to 2EE0 Us16
3 P1003 Base Frequency 0.01Hz 0 to 400 0 to 9C40 Us16
4 P1004 Multi-speed setting (high speed) 0.01Hz 0 to 400 0 to 9C40 Us16
5 P1005 Multi-speed setting (middle speed) 0.01Hz 0 to 400 0 to 9C40 Us16
6 P1006 Multi-speed setting (low speed) 0.01Hz 0 to 400 0 to 9C40 Us16
···
···
···
···
···
···
···
CAUTION
Write to Pr. 77 and Pr. 79 is not allowed from the network with FR-A7NP. (Read is allowed.)
P1902.1
Sub-Index Number
1000+Parameter Numbe
r