Filter
Top Products
76
PPO TYPE NON-SUPPORT SPECIFICATION
(3) Operation mode write
Write of the operation mode can be performed from the master.
(4) Set frequency read/write
The frequency set to the inverter can be read/written from the master.
*1 Writing to PNU = DH or PNU = EH can be read out from PNU = DH.
*2 To change the running frequency consecutively, always write data to the inverter RAM.
(5) Terminal input read
The analog input values of terminals 2 and 4 can be read.
IND PNU Item Data Definition
0100H BH
Operation mode
External operation mode:10H
PU operation mode:11H (When Pr.79 = "6")
Network operation mode:14H
IND PNU Item Data Definition
0100H DH
Set frequency (RAM) *1 Set frequency (RAM) is read or written.
0100H EH
Set frequency (EEPROM) *1,2 Write set frequency to EEPROM.
IND PNU Name
Minimum
Setting
Increments
0100H FH Terminal 2 input value read 0.1%
0100H 10H Terminal 4 input value read 0.1%