Filter
Top Products
36
FUNCTIONS
5.2 Input to the inverter from the network
Main items which can be commanded from the network to the inverter and their descriptions are explained
below.
Item Description
Refer to page
PPO Type
Support
Specifications
PPO Type
Non-Support
Specifications
Frequency setting Set the running frequency of the inverter. 50 76
Operation mode write Set the operation mode of the inverter. 55 76
Run command
Set the control input command such as forward operation
signal (STF) and reverse rotation signal (STR).
48 75
Inverter reset Reset the inverter. 48, 56 74
Parameter write Set parameters of the inverter. 46, 62 67, 78
Parameter clear Return parameters to the initial values. 55 74
Input terminal function Use the function of the inverter input terminal. 51 75
REMARKS
y Refer to the inverter manual for functions controllable from the network in each operation mode.