Filter
Top Products
80
PPO TYPE NON-SUPPORT SPECIFICATION
8.8.3 Pr. 900 to calibration parameter (%) area (IND=0400H (IND=04H,
PP=00H))
The following parameters can be set with IND=0400H.
* These parameters can be set for the Japanese version only.
IND PNU
Parameter
Number
Name
Minimum
Setting
Increments
0400H 2H 902 Terminal 2 frequency setting bias 0.1%
0400H 3H 903 Terminal 2 frequency setting gain 0.1%
0400H 4H 904 Terminal 4 frequency setting bias 0.1%
0400H 5H 905 Terminal 4 frequency setting gain 0.1%
0400H 16H 922 Frequency setting voltage bias (built-in potentiometer) * 0.1%
0400H 17H 923 Frequency setting voltage gain (built-in potentiometer) * 0.1%