Filter
Top Products
CHAPTER 3: INTERFACE ENERVISTA LM10 SOFTWARE
LM10 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL 3–23
3.3 EnerVista LM10 Software
3.3.1 Description
The EnerVista LM10 software is intended as an interface to the GE Multilin LM10 Motor
Protection System. It has all the capabilities of the GE Multilin LM10 Motor Protection
System, although some of the operations may differ slightly. The major difference is
configuration parameters are not directly changed from the PDU screen, they must be
downloaded after modifying. Also data values can be entered directly with the keyboard
digits.
FIGURE 3–1: Main software screen
3.3.2 Functional Details
The EnerVista LM10 software has three menus: File, Communication and Help.
The File menu has following submenu items:
• New: Loads the memory with default values for the LM10 configuration parameters.
• Load: Loads the selected file and restores the LM10 configuration and communication
parameters from the file.
• Save: Saves the LM10 configuration and communication parameters to the selected
or entered file.
• Exit: Closes the program.
The Communication menu has the following submenu items: