Filter
Top Products
CHAPTER 4: FUNCTIONALITY CONFIGURATION SETTINGS
LM10 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL 4–37
An auxiliary relay can be connected to any number of warning devices. With the settings in
this menu, the user can select which combination of trip conditions will activate the
auxiliary relay.
4.2.10 Passcode and Login
PATH: Configuration ØØØØØØØØ Aux Relay Faults
A passcode is required to change configuration parameters. Without a passcode, the
display will only indicate configuration parameters, current operating conditions, and
history records. This security feature reduces the likelihood of inadvertent changes.
To make any configuration changes, the login level must be set to “Config”. The "User" login
simply allows viewing of history and current status but will not accept changes to any
parameters. As an extra security feature, the login level can automatically be set to "User"
via DeviceNet communications. Refer to Assembly Object, Class Code 4, Instance 100 for
more information.
Aux Relay Faults
Load Loss off
Range: on, off
Aux Relay Faults
Power Failure off
*
Range: on, off
Aux Relay Faults
Aux Sense off
Range: on, off
Aux Relay Faults
Device Net off
Range: on, off
Aux Relay Faults
Volt Range off
Range: on, off
* Feature currently not available.
Configuration
Passcode,login
Run Operations
Factory default
Pass Code, Login
User:
Pass Code, Login
Config:
Range: 0 to 65535 in steps of 1
Pass Code, Login
Change Pass Code
Range: 0 to 65535 in steps of 1