Filter
Top Products
6–66 LM10 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
REVISION HISTORY CHAPTER 6: MISCELLANEOUS
3.2.4 Move section to 5.1.10
5.1.2 Add Poll Data 4
5.1.6 Add Assembly Object, Class Code 4, Instance 105 (Poll Data Group 4)
5.1.8 Control Supervisor Object - Delete Section
5.1.11 Change format code F15 to include Poll Data Group 4
5.1.11 Add bit locations to format codes F21 and F22
Table 6–4: Changes to Manual Since Release A3
Section Number Revision
Update Manual to A4 and Firmware (and Firmware references) to
v1.60
1.3.3 Change revision in the images of the product from 1.50 to 1.60
1.4.1 Table 1-1 - LM10 Order Code text changed
1.5.1
Change Ground Fault, Jam, Stall, Current Unbalance, Load Loss
specifications
3.2.3 Change text "The unit has three passcode levels..."
4.2.1
Changes to Ground Fault Level, Stall Level, Load Loss Level,
Undervoltage, Overvoltage
4.2.6 Changes to Ground Setup, Stall Setup
4.2.6 Change to equation 4-3
5.1.6
Assembly Object, Class Code 4, Instance 100
"Security to Min" in Control Byte clarified. Note added.
5.1.6
Change to Assembly Object, Class Code 4, Instance 101, Attribute
3,Bit 6
5.1.11 Change to format code F20
5.1.11 Change to format code F24
5.1.2 Change to Identity Object, Class Code 1, Instance 1, Attributes
5.1.11 Add attribute (Attribute: 0x34)
5.1.11 New format code: F25 - Input Switch Status
5.1.11 Add attribute (Attribute: 0x38)
5.1.11 New format code: F26 - Remaining Cool-Down Period
5.1.6 Change to Assembly Object, Class Code 4, Instance 52
5.1.11 Change text description for attribute 0x26
5.1.11 Correction to F14 format
5.1.7 Changes to Connection Object, Class Code 5, Instance 2 (polled...)
5.1.11 Change the ranges for the delays to match range shown in Chapter 4
5.1.5 Add three additional tables before the "Connection Object" section
5.1.6
Assembly Object, Class Code 4, Instance 100
Change bit 5 from "Reserved" to "Security to Min"
Add note at the bottom of the table
5.1.11
Extension Object, Class Code 0x64, Instance 1
Add a note to "Reset LM10" at attribute 0x2E
5.1.1 - 5.1.5 Miscellaneous text/table changes
Table 6–3: Changes to Manual Since Release A4
Section Number Revision