Filter
Top Products
155
McAfee
®
Host Intrusion Prevention 6.1 Product Guide Host Intrusion Prevention Client
Solaris client
9
Starting and stopping the client
You may need to stop a running client and restart it as part of troubleshooting.
To stop a Solaris client:
1 Disable IPS protection. Use one of these procedures:
Set IPS Options to Off in the ePO console and apply the policy to the client.
Run the command: hipts engines MISC:off.
2 Run the command: /etc/rc2.d/S99hip stop.
To restart a Solaris client:
1 Run the command:
/etc/rc2.d/S99hip restart.
2 Enable IPS protection. Use one of these procedures, depending on which you used
to stop the client:
Set IPS Options to On in the ePO console and apply the policy to the client.
Run the command: hipts engines MISC:on.
hipts message <message name>:on Display the message type indicated when logging is
set to “on.” Messages include:
error
warning
debug
info
violations
hipts message <message name>:off Hide the message type indicated when logging is
set to “on.”Message error is off by default.
hipts message all:on Display all message types when logging is set to
“on.”
hipts message all:off Hide all message types when logging is set to “on.”
hipts engines <engine name>:on Turn on the engine indicated. Engine is on by
default. Engines include:
MISC
FILES
GUID
MMAP
BO
ENV
HTTP
hipts engines <engine name>:off Turn off the engine indicated.
hipts engines all:on Turn on all engines.
hipts engines all:off Turn off all engines.
Tip
In addition to using the troubleshooting tool, consult the HIPShield.log and HIPClient.log
files in the /opt/McAfee/hip/log directory to verify operations or track issues.
Run this command... To do this...