Filter
Top Products
MNA1MLSDM00EN, V2.01, 07.2009
PAS4•S 1 Introduction
Portal axes with ball screw drive 17
1.5 Manufacturer's Declaration
MANUFACTURER’S DECLARATION
according to EC Directive on Machinery 98/37/EG
We hereby declare that the following product:
Designation: Portal axis with toothed belt
Portal axis with spindle
Type: PAS41x, PAS42x, PAS43x, PAS44x
Product number: 73xx xxxx xxx
in the version delivered is intended for installation in a machine. Commissioning is
prohibited unless the machine meets the regulations according to the EC directives.
Please observe the safety instructions in our technical documentation.
Applied
harmonized
standards,
especially
EN ISO 12100-1:2003-11
Safety of machinery basic concepts,
principles for design
Part 1: Basic terminology, methodology
EN ISO 12100-2:2003-11
Safety of machinery basic concepts,
principles for design
Part 2: Technical principles and specifications
Applied national
standards and
technical
specifications,
especially
Product documentation
Company stamp:
Date/Signature: 30 July 2009
Name/Department: Wolfgang Brandstätter/Development