Filter
Top Products
MNA1MLSDM00EN, V2.01, 07.2009
PAS4•S 2 Before you begin - safety information
Portal axes with ball screw drive 19
2 Before you begin - safety information
2.1 Qualification of personnel
Only appropriately trained persons who are familiar with and understand
the contents of this manual and all other pertinent product documenta-
tion are authorized to work on and with this product. In addition, these
persons must have received safety training to recognize and avoid haz-
ards involved. These persons must have sufficient technical training,
knowledge and experience and be able to foresee and detect potential
hazards that may be caused by using the product, by changing the set-
tings and by the mechanical, electrical and electronic equipment of the
entire system in which the product is used.
All persons working on and with the product must be fully familiar with all
applicable standards, directives, and accident prevention regulations
when performing such work.
2.2 Intended use
This product is a portal axis with mounted motor and intended for indus-
trial use according to this manual.
The product may only be used in compliance with all applicable safety
regulations and directives, the specified requirements and the technical
data.
Prior to using the product, you must perform a risk assessment in view
of the planned application. Based on the results, the appropriate safety
measures must be implemented.
Since the product is used as a component in an entire system, you must
ensure the safety of persons by means of the design of this entire sys-
tem (for example, machine design).
Operate the product only with the specified cables and accessories. Use
only genuine accessories and spare parts.
The product must NEVER be operated in explosive atmospheres (haz-
ardous locations, Ex areas).