Filter
Top Products
MNA1MLSDM00EN, V2.01, 07.2009
PAS4•S 3 Technical Data
Portal axes with ball screw drive 41
Profile length of carriage F [mm] 270 540
Number of tapped holes for mounting
2)
n10 22
Distance between tapped holes [mm] 45 ±0.03 45 ±0.03
Limit switch position at drive end E0 [mm] 200 120 145 170 200 120 145 170
Limit switch position opposite drive end E1 [mm] 200 120 145 170 470 390 415 440
Stroke reserve to mechanical stop
3)
c [mm] 20 20
Length of cover strip clamp d [mm] 20 20
Deflection of cover strip D [mm] 80 - 80 -
Minimum distance between 2 carriages [mm] 90 40 90 40
1) In the case of axes with more than one carriage, you must add the carriage length (LC) and the distance between the carriages
for each additional carriage. More than 1 carriage on request.
2) Prepared for locating rings (see Accessories)
3) The stroke reserve must be increased depending on the application factors load, acceleration and velocity. The displacement dis-
tances must be taken into account in terms of the total length.
Carriage type Type 1 Type 4