Filter
Top Products
82 Portal axes with ball screw drive
8 Service, maintenance and disposal PAS4•S
MNA1MLSDM00EN, V2.01, 07.2009
8.2 Maintenance
The maintenance intervals for cleaning and lubrication must be adhered
to.
̈ Include the maintenance intervals in your maintenance schedule.
8.2.1 Cleaning
Due to its design, the product is not susceptible to the ingress of con-
taminants and external objects. The guide is located inside the axis body
and it is covered.
The product must be inspected and cleaned at regular intervals.
̈ Do not use compressed air for cleaning.
̈ Remove large particles and dirt from the surface at regular inter-
vals.
̈ The anodized surface only has a limited resistance to alkaline
cleaning agents. Therefore, use only neutral cleaning agents for
cleaning.
̈ Use only damp, soft and lint-free cleaning cloths to wipe the sur-
face.
Cover strip The cover strip is teflon-coated. The friction causes abrasion on the
cover strip.
̈ Remove abrasion products at regular intervals.