Filter
Top Products
MNA1MLSDM00EN, V2.01, 07.2009
PAS4•S 8 Service, maintenance and disposal
Portal axes with ball screw drive 85
Procedure
Lubricating the linear guide
̈ Inject the correct type and volume of grease into the two outer
grease nipples at one side of the carriage.
Lubricating the drive element
̈ Inject the correct type and volume of grease into the center grease
nipple at one side of the carriage.
8.3 Shipping, storage, disposal
Note the ambient conditions on page 23.
Shipping The product must be protected against shocks during transportation. If
possible, use the original packaging for shipping.
Storage The product may only be stored in spaces where the specified permis-
sible ambient conditions for room temperature and humidity are met.
Protect the product from dust and dirt.
Disposal The product consists of various materials that can be recycled and must
be disposed of separately. Dispose of the product in accordance with lo-
cal regulations.