Filter
Top Products
MNA1MLSDM00EN, V2.01, 07.2009
PAS4•S 2 Before you begin - safety information
Portal axes with ball screw drive 21
2.4 Standards and terminology
Technical terms, terminology and the corresponding descriptions in this
manual are intended to use the terms or definitions of the pertinent
standards.
In the area of drive systems, this includes, but is not limited to, terms
such as "safety function", "safe state", "fault", "fault reset", "failure", "er-
ror", "error message", "warning", "warning message", etc.
Among others, these standards include:
• IEC 61800 series: "Adjustable speed electrical power drive sys-
tems"
• IEC 61800-7 series: "Adjustable speed electrical power drive sys-
tems - Part 7-1: Generic interface and use of profiles for power drive
systems - Interface definition"
• IEC 61158 series: "Industrial communication networks - Fieldbus
specifications"
• IEC 61784 series: "Industrial communication networks - Profiles"
• IEC 61508 series: "Functional safety of electrical/electronic/pro-
grammable electronic safety-related systems"
Also see the glossary at the end of this manual.