Filter
Top Products
MNA1MLSDM00EN, V2.01, 07.2009
PAS4•S 3 Technical Data
Portal axes with ball screw drive 35
Carriage type Type 1 Type 4
Cover strip Yes No Yes No
Number of ball screw supports 0, 1 or
2
0120, 1 or
2
012
Total length of portal axis
1)
LP [mm] 569 +
X
449 +
X
489 +
X
529 +
X
779 +
X
659 +
X
699 +
X
739 +
X
Total length of support axis LS [mm] 474 +
X
354 +
X
394 +
X
434 +
X
684 +
X
564 +
X
604 +
X
644 +
X
Stroke X [mm] See characteristics
Carriage length LC [mm] 394 274 604 484
Profile length of carriage F [mm] 230 440
Number of tapped holes for mounting
2)
n10 22
Distance between tapped holes [mm] 35 ±0.03 35 ±0.03
Limit switch position at drive end E0 [mm] 143 83 103 123 143 83 103 123
Limit switch position opposite drive end E1 [mm] 143 83 103 123 353 293 313 333
Stroke reserve to mechanical stop
3)
c [mm] 15 15
Length of cover strip clamp d [mm] 15 15
Deflection of cover strip D [mm] 60 - 60 -
Minimum distance between 2 carriages [mm] 90 35 90 35
1) In the case of axes with more than one carriage, you must add the carriage length (LC) and the distance between the carriages
for each additional carriage. More than 1 carriage on request.
2) Prepared for locating rings (see Accessories)
3) The stroke reserve must be increased depending on the application factors load, acceleration and velocity. The displacement dis-
tances must be taken into account in terms of the total length.