Dell 38XX Marine Radio User Manual


 
export storageArray securityKey
import storageArray securityKey
set storageArray securityKey
start secureErase (physicalDisk | physicalDisks)
Create Host
Description
This command creates a new host. If you do not specify a host group in which to create the new host,
the new host is created in the default group.
Syntax
create host userLabel=”hostName
[hostGroup=(“hostGroupName” | defaultGroup)]
[hostType=(hostTypeIndexLabel |
hostTypeIndexNumber)]
Parameters
Parameter Description
userLabel
The name that you want to give the host that you are creating.
Enclose the host name in double quotation marks (“ ”).
hostGroup
The name of the host group in which you want to create a new
host. Enclose the host group name in double quotation marks
(“ ”). (If a host group does not exist, you can create a new host
group by using the create hostGroup command.) The
defaultGroup option is the host group that contains the host to
which the virtual disk is mapped.
hostType
The index label or the index number that identifies the host type.
Use the show storageArray hostTypeTable command to
generate a list of available host type identifiers. If the host type
has special characters, enclose the host type in double quotation
marks (“ ”).
NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the
names. Command names can have a maximum of 30 characters. If you exceed the maximum
character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.
Create Host Group
Description
This command creates a new host group.
Syntax
create hostGroup userLabel="hostGroupName"
169