Dell 38XX Marine Radio User Manual


 
Recurring Syntax Syntax Value
IPV4SubnetMask=ipv4-address |
IPV4VlanID=integer |
IPV6VlanID=integer |
maxFramePayload=integer |
tcpListeningPort=tcp-port-id|
NOTE: You must set the enableIPV4
parameter or the enableIPV6 parameter to
TRUE to ensure that the specific IPV4 or IPV6
setting is applied.
NOTE: The IPV6 address space is 128 bits. It is
represented by eight 16-bit hexadecimal
blocks separated by colons. You may drop
leading zeros, and use a double colon to
represent consecutive blocks of zeroes.
instance-based-repository-spec
repositoryRAIDLevel=repository-raidlevel
repositoryPhysicalDisks=(physical diskspec- list)
[enclosureLossProtect=boolean]
repositoryDiskGroup=virtual-diskgroup- number
[freeCapacityArea=integer-literal]
Specify repositoryRAIDLevel with
repositoryPhysicalDisks. Do not specify
RAID level or physical disks with a disk group. Do
not set
enclosureLossProtect when specifying
a disk group.
NOTE: For enclosure loss protection to work,
each physical disk in a disk group must be on
a separate enclosure. If you set
enclosureLossProtect=TRUE and have
selected more than one physical disk from any
one enclosure, the storage array returns an
error. If you set
enclosureLossProtect=FALSE, the
storage array performs operations, but the
disk group you create might not have
enclosure loss protection.
NOTE: To determine if a free capacity area
exists, issue the show diskGroup command.
count-based-repository-spec
repositoryRAIDLevel=repository-raidlevel
repositoryPhysicalDiskCount=integerliteral
35