Filter
Top Products
Parameter
Parameter Description
host
Name of the host to delete. You must put brackets
([ ]) around the host name. If the host name has
special characters, you must also put quotation
marks (" ") around the host name.
NOTE: A host is a system that is attached to
the storage array and accesses the virtual disks
on the storage array through its HBA
host ports.
Delete Host Group
Description
This command deletes a host group.
CAUTION: This command deletes all of the host definitions in the host group.
Syntax
delete hostGroup [hostGroupName]
Parameter
Parameter Description
hostGroup
Name of the host group to delete. You must put
brackets ([ ]) around the host group name. If the
name of the host group has special characters, you
must also put quotation marks (" ") around the host
group name.
NOTE: A host group is an optional topological
element that is a collection of hosts that share
access to the same virtual disks. The host
group is a logical entity.
Delete Host Port
Description
This command deletes an HBA host port identification. The identification is a software value that
represents the physical HBA host port to the RAID controller module. By deleting the identification, the
RAID controller module no longer recognizes instructions and data from the HBA host port.
207