Filter
Top Products
Parameters
Parameter Description
enable
Enable automatic collection of support bundles
when a critical MEL event is detected.
disable
Disable automatic collection of support bundles
where the feature was previously enabled.
all
Apply the command to all storage arrays detected
from the host.
storageArrayName
Apply the command to the named storage array.
data
Store the data generated by the command at the
location specified by the pathName.
Scheduling Snapshots
NOTE: This command is applicable to both the Snapshot and the Snapshot (Legacy) premium
feature.
Description
You can use the enableSchedule and the schedule parameters to schedule automatic snapshots.
Automatic snapshots can be scheduled daily, weekly, or monthly (by day or by date). The
enableSchedule parameter turns on or off the ability to schedule snapshots. When you enable
scheduling, you use the
schedule parameter to define when you want the snapshots to occur.
Parameters
Parameter Description
immediate
Begins a snapshot operation immediately; a
snapshot virtual disk is created and a copy-on-
write operation begins.
startDate
Defines a specific start date snapshot virtual disk
creation. The format for this option is MM:DD:YY. If
no start date is provided, the current date is used.
For example: startDate=06:27:11.
scheduleDay
Defines a day of the week you want to create a
snapshot virtual disk and perform a copy-on-write
operation. The values that you can enter are:
monday, tuesday, wednesday, thursday,
friday, saturday, sunday, and all. For example:
scheduleDay=wednesday.
startTime
Defines time of a day you want to create a
snapshot virtual disk and start performing a copy-
on-write operation. The format for entering the
283