Filter
Top Products
Notes
Statistics are captured for replicated virtual disks in the Primary role. The statistics collected include the
following data:
• Synchronization start time
• Synchronization type (manual or periodic)
• Synchronization duration
• Number of bytes sent
• Maximum write time (for a single write)
• Minimum write time (for a single write)
• Minimum synchronization data rate
• Maximum synchronization data rate
• Total write time
• Repository utilization (%)
• Recovery point age
During initial synchronization, statistics samples are captured approximately every 15 minutes.
The synchronization statistics are included in the support bundle.
Save Storage Array Configuration
Description
This command creates a script file that you can use to create the current storage array virtual disk
configuration.
Syntax
save storageArray configuration file="filename"
[(allConfig | globalSettings=(TRUE | FALSE) virtualDiskConfigAndSettings=(TRUE
| FALSE)
hostTopology=(TRUE | FALSE)
lunMappings=(TRUE | FALSE))]
Parameters
Parameter Description
file
Name of the file that contains the configuration
values. You must put quotation marks (" ") around
the file name.
allConfig
Saves all of the configuration values to the file. (If
you choose this parameter, all of the configuration
parameters are set to TRUE.)
globalSettings
Saves the global settings to the file. To save the
global settings, set this parameter to TRUE. To
274