Dell 38XX Marine Radio User Manual


 
Parameters
Parameter Description
snapGroup
The alphanumeric identifier (including - and _) of
the snapshot group on which you want to run a
media scan. Enclose the snapshot group name in
double quotation marks (" ") inside of square
brackets ([ ]).
mediaScanEnabled
The setting to turn on or turn off media scan for
the virtual disk. To turn on media scan, set this
parameter to TRUE. To turn off media scan, set this
parameter to FALSE. (If media scan is disabled at
the storage array level, this parameter has no
effect.)
consistencyCheckEnabled
The setting to turn on or turn off consistency
checking during a media scan. To turn on
consistency checking, set this parameter to TRUE.
To turn off consistency checking, set this
parameter to FALSE.
Set Snapshot Group Repository Virtual Disk Capacity
Description
This command increases or decreases the capacity of a snapshot group repository virtual disk.
Syntax For Increasing Capacity
set snapGroup ["snapGroupName"]
increaseRepositoryCapacity repositoryVirtualDisks=(repos_xxxx)
Syntax For Decreasing Capacity
set snapGroup ["snapGroupName"]
decreaseRepositoryCapacity count=numberOfVirtual disks
Parameters
Parameter Description
snapGroup
The alphanumeric identifier (including - and _) of
the snapshot group on which you want to run a
media scan. Enclose the snapshot group name in
double quotation marks (" ") inside of square
brackets ([ ]).
repositoryVirtualDisk
The name of the repository virtual disk for which
you want to increase capacity. An available
standard virtual disk is added to the repository
312