Dell 38XX Marine Radio User Manual


 
Revive Snapshot Group
Description
This command forces the specified snapshot group to the Optimal state. If the snapshot group is not in a
Failed state, the firmware displays an error message and does not run this command.
Syntax
revive snapGroup [snapGroupName]
Parameter
Parameter Description
snapGroup
The alphanumeric identifier (including - and _) of
the snapshot group that you want to set to the
Optimal state. Enclose the snapshot group
identifier in square brackets ([ ]).
Revive Snapshot Virtual Disk
Description
This command forces a specified snapshot virtual disk to the Optimal state. The snapshot virtual disk can
be:
A standalone snapshot virtual disk
A snapshot virtual disk that is a member of a consistency group
If the snapshot virtual disk is not in a Failed state, the firmware displays an error message and does not
run this command.
NOTE: You cannot use this command for a snapshot virtual disk that is used in online virtual disk
copy.
Syntax
revive snapVirtualDisk [snapVirtualDiskName]
Parameter
Parameter Description
snapVirtualDisk
The alphanumeric identifier (including - and _) of
the snapshot virtual disk that you want to set to the
Optimal state. Enclose the snapshot virtual disk
identifier in square brackets ([ ]).
269