Filter
Top Products
4. SLANT MODE
4-7
4.3 Display Range
The [RANGE] control selects the detection range. The range selected is
momentarily displayed in large characters at the top of the screen. Range is
always displayed at the top right hand corner of the screen.
SEA SURFACE
Range indicated
on the screen.
BOTTOM
SEA SURFACE
Range indicated
on the screen.
BOTTOM
Range concept
Below are the default ranges (in meters).
Range Setting 1 2 3 4 5 6
Range 100 200 400 600 800 1000
1. If the slant display or slant combination display is active, press the [HSV] key
to choose the slant mode.
Range and gain indications for the slant display are shown in yellow.
2. Operate the [RANGE] control to select desired range.
Note 1:Ranges may be preset as desired on the PRESET, MEMORY CARD
menu. For further details, see H/S-SCAN RANGE on page 9-5.
Note 2: With the target lock feature active, range is automatically changed
according to target position. (INTERLOCK on the TARGET LOCK menu is set to
the option TILT&RANGE.)