Filter
Top Products
10. MEMORY CARD OPERATIONS
10-3
10.2 Loading, Deleting Files
This section shows you how to load and delete files. You may load files on the
display to analyze echoes. When a memory card becomes full, you may wish to
delete unnecessary files.
1. Insert memory card.
2. Press the [MENU] key to open the menu.
3. Select OTHERS and press the [MENU] key.
4. Select PRESET, MEMORY CARD and press the [MENU] key.
5. Select MEMORY CARD and press the [MENU] key.
1/1 PREV PAGE NEXT PAGE
CONFIGURATION
2003/10/26 12:12 CONFIGURATION
2003/10/01 00:00
2003/10/01 00:01
CONFIGURATION
CARD OPERATION FORMAT SAVE PICT SAVE CONFIG QUIT
MEMORY CARD menu
6. Select a file and press the [MENU] key.
1/1 PREV PAGE NEXT PAGE
2003/10/26 12:12
2003/10/01 00:00
2003/10/20 00:01
CANCEL
DELETE
RECALL
CARD OPERATION FORMAT SAVE PICT SAVE CONFIG QUIT
CONFIGURATION
CONFIGURATION
CONFIGURATION
MEMORY CARD menu, recall, delete dialog box opened
7. Select RECALL or DELETE as appropriate and press the [MENU] key.
When you select RECALL, the setting is loaded. Then, rotating the [USER
PROG] control change a user program.
8. Select QUIT and press the [MENU] key.
When RECALL is selected, the file from the memory card is now loaded into the
internal memory. If you want to display the image loaded, refer to “2.21.1
Recalling stored picture”.