Filter
Top Products
3. VERTICAL MODE
3-6
3.5 Display Range
The [RANGE] control selects the detection range. The range selected is
momentarily displayed in large characters at the center of the vertical 1 display.
Range is always displayed at the lower part of the vertical 1 display.
Below are the default ranges (in meters).
Range Setting 1 2 3 4 5 6
Range 100 200 400 600 800 1000
1. Press the [HSV] key to show the gain and range indications of the vertical
mode in yellow.
2. Operate the [RANGE] control to select desired range.
Note: Ranges may be preset as desired on the PRESET, MEMORY CARD
menu. For further details, see V-SCAN RANGE on page 9-5.
3.6 Measuring the Range
Operate the trackball to place the trackball mark on the vertical 1 (or vertical 2)
display. The range to the location selected is shown at the top left corner.
Trackball mark
N
W
S
E
2000
NUMERIC/
GRAPHIC
DATA
DISPLAY
1000 1500
500
1000
500
2000m
G
V12
°
8
V
1473m
473m
A 33°
1547m
Trackball data
Slant range
Horizontal range
Vertical range
Angle to trackball
mark from
horizontal
34
°
56.789N
123
°
45.678E
Trackball mark
position
R 2000m
G 8.0
Measuring range with the trackball