Filter
Top Products
1. OPERATIONAL OVERVIEW
1-16
3. Select menu item desired with the trackball and press the [MENU] key. (For
example, select NOISE LIMITER.) A dialog box for the corresponding menu
item appears.
QUIT
CANCEL
How to set numeric data
1. Select or as desired.
2. Press the [MENU] key to
change setting.
3. Select QUIT and press
the [MENU] key to finish.
H-SCAN SETTING
TX INTERVAL
TX PULSE LENGTH
TX POWER
TVG-NEAR
: 9
: 9
: 9
: 0
TVG-MEDIUM
TVG-FAR
AGC
2ND AGC
ECHO AVERAGE
: 0
: 0
: 0
REVERBERATION
SIDE LOBE SUPPRESS : 1
: 0
MENU QUIT
INT REJECT
: 0
: 0
: 0
QUIT
FREQ SHIFT : 0
FREQ/BEARING SET : 180
OTHERS...
NEAR AGC : 0
BOTTOM SUPPRESS : 0
NOISE LIMITER : 2
H-SCAN SETTING menu
4. Select S (raise setting) or T (lower setting) with the trackball and press the
[MENU] key to change setting.
Note: For items having options the arrows in the dialog box are replaced
with appropriate options. For example the dialog box for selection of
picture advance speed in the echo sounder mode looks as below.
QUIT
CANCEL
1/1
1/2
1/4
1/8
SPEED SYNC
Echo sounder picture advance speed dialog box
5. Use the trackball to select QUIT from the dialog box and press the [MENU]
key to close the menu.
6. Select QUIT at the top of the menu screen and press the [MENU] key to
close all menus.