Filter
Top Products
11. MAINTENANCE, TROUBLESHOOTING
11-7
11.7 Status Messages
Status messages appear at the screen center to alert the operator. These are as
below.
Status messages and their meanings
Status message Meaning
TX OFF Transmission turned off from the menu.
RAISE/LOWER
TEST*
Raise/lower command received from the control unit in
normal operation, to manually test raise/lower switch in hull
unit. Raise/lower keys on the control unit are inoperative
during the hull unit test.
* = Not displayed when TX is OFF.
11.8 Tests
A comprehensive diagnostic facility is provided for testing the equipment. If NG
(no good) or abnormal display appears in the test results for any test, contact
your dealer.
11.8.1 TEST menu
1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select INITIAL SETTING and press the [MENU] key.
4. Select TEST and press the [MENU] key to open the TEST menu.
INITIAL SETTING
OTHERS
MENU QUIT
QUIT
BOARD TEST... : EXECUTE
PANEL TEST... : EXECUTE
TEST PATTERN... : EXECUTE
RX TEST... : EXECUTE
NOISE TEST... : EXECUTE
TX : OFF
QUIT
TEST
QUIT
TEST menu