Filter
Top Products
5. ECHO SOUNDER MODE
5-15
5.9 ES1 SETTING Menu Overview
Display the ES1 SETTING menu as follows.
1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select ES1 SETTING and press the [MENU] key.
MENU QUIT
OTHERS QUIT
GAIN : 5
RANGE : 160 m
SHIFT : 0 m
CLUTTER : 0
SIGNAL LEVEL : 0
INT REJECT : OFF
PICTURE ADVANCE : 1/1
PICT ADVC AT SHOOT
: SPEED SYNC
COLOR SETTING...
COLOR RESPONSE...
SCALE POSITION : RIGHT
ES1 SETTING
QUIT
ES1 SETTING menu
ES1 setting menu description
The GAIN, RANGE, SHIFT and PICTURE ADVANCE are described at the
previous pages. For the COLOR SETTING and the COLOR RESPONSE, see
page 2-48 and 2-49, respectively.
CLUTTER: Suppress low level noise, which shows itself on the display as
light-blue dots. The setting range is 0-10 and 0 is clutter rejection off. The higher
the setting, the greater the degree of suppression.
SIGNAL LEVEL: Dirty water or reflections from plankton may be painted on the
screen in green or light-blue. These echoes may be erased in order of strength.
The setting range is 0-15.
INT REJECT: Turn on to suppress interference from other equipment on board.
PICT ADVC AT SHOOT: Sets picture advance speed to set when shooting of
the net. You may select advance speed independently or synchronize it with
ship’s speed.
SCALE POSITION: The range scale can be displayed on the right or left side of
the echo sounder display.