Filter
Top Products
1. OPERATIONAL OVERVIEW
1-5
3. Use the trackball to select DISPLAY SETTING and press the [MENU] key.
DISPLAY SETTING
DISPLAY MODE...
MODE SELECTION : MODE KEY
TX/RX MODE : ALTERNATIVE
H2/S DISPLAY : LANDSCAPE
PRESENTATION MODE :HEAD UP
TM DISPLAY RANGE :1.6R
BEARING REF : SHIP HEADING
TILT LEVER : TILT
S AUTO OFF CENTER : OFF
H-SLICE WIDTH : 16
H-SLICE PICT ADVC : KP SYNC
NET COURSE MARK : ENTER
MANUAL DEGAUSS : EXECUTE
AUTO DEGAUSS : INT SENSOR
DIMMER : 10
KEY BEEP VOLUME : 5
OTHERS
MENU QUIT
QUIT
QUIT
DISPLAY SETTING menu
4. Select DIMMER with the trackball and press the [MENU] key to open the
dialog box.
QUIT
CANCEL
DIALOG BOX FOR SETTING NUMERIC DATA
Select (raise setting) or (lower setting) with
the trackball and press [MENU] key to change
setting. Select QUIT to finish; CANCEL to cancel
operation.
Dialog box for setting numeric value
5. Select S (raise setting) or T (lower setting) with the trackball.
6. Press the [MENU] key to change the setting.
7. Select QUIT with the trackball and press the [MENU] key.
8. Select QUIT at the top of the menu screen and press the [MENU] key to
close all menus.