Filter
Top Products
9. OTHERS MENU
9-11
DATA DISPLAY menu
This menu sets the readout format for marks on the display.
Default settings are shown in the illustration below.
INITIAL SETTING
OTHERS
MENU QUIT
QUIT
RANGE & BEARING : ON
CURSOR POSITION : OFF
COURSE : 32 CMPS
CURRENT DATA : 360˚TRUE
EVENT MARK : 32 CMPS
OTHER MARKS : ±180˚ REL
DISTANCE FOR SHOOT : MILE
WATER TEMP : ˚C
QUIT
DATA DISPLAY
QUIT
DATA DISPLAY menu
RANGE & BEARING: Turns on/off the range and bearing data which appears
when the range and bearing marks are turned on.
CURSOR POSITION: Turns on/off the cursor position (latitude and longitude)
display. Requires navigation data.
COURSE: Selects how to display course: 32 compass points, 360
° True,
360° Relative, 180° Relative.
CURRENT DATA: Selects how to display tidal current data; 32 compass points,
360 ° True, 360° Relative, 180° Relative.
EVENT MARK: Selects how to display event mark data; 32 compass points,
360 ° True, 360° Relative, 180° Relative.
OTHER MARKS: Selects how to display other mark data; 32 compass points,
360 ° True, 360° Relative, ±180°. ±180° shows xxxS in case of starboard
direction; xxxP in case of port direction. True indications require heading sensor.
32 compass points shows bearing with alphabet indication, for example, “NNE”.
DISTANCE FOR SHOOT: Selects the distance run unit to show the distance run
after shooting the net. The choices are miles, meters and feet.
WATER TEMP: Chooses water temperature unit; in °C (Celsius) or °F
(Fahrenheit).