Filter
Top Products
9. OTHERS MENU
9-2
9.2 DISPLAY SETTING menu
The DISPLAY SETTING menu sets various display parameters.
9.2.1 Opening the DISPLAY SETTING menu
1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select DISPLAY SETTING and press the [MENU] key.
DISPLAY SETTING
DISPLAY MODE...
MODE SELECTION : MODE KEY
TX/RX MODE : ALTERNATIVE
H2/S DISPLAY : LANDSCAPE
PRESENTATION MODE :HEAD UP
TM DISPLAY RANGE :1.6R
BEARING REF : SHIP HEADING
TILT LEVER : TILT
S AUTO OFF CENTER : OFF
H-SLICE WIDTH : 16
H-SLICE PICT ADVC : KP SYNC
NET COURSE MARK : ENTER
MANUAL DEGAUSS : EXECUTE
AUTO DEGAUSS : INT SENSOR
DIMMER : 10
KEY BEEP VOLUME : 5
OTHERS
MENU QUIT
QUIT
QUIT
DISPLAY SETTNG menu
9.2.2 DISPLAY SETTING menu description
DISPLAY MODE: Selects the display modes to use. The default modes are
Horizontal, Horizontal1 + Horizontal2, Vertical1, Vertical 1 + Vertical 2, and
History.
MODE SELECTION: Determines how display modes are chosen: cyclical
pressing of [MODE] key or pull-down menu. The default setting is MODE KEY.
TX/RX MODE: Select how to transmit and receive in combination displays.
ALTERNATIVE executes Tx and Rx one display at a time. MULTI simultaneously
executes Tx and Rx on each display.
H2/S DISPLAY: Selects the combination mode of two horizontal displays:
Landscape, Portrait, Right Inset and Left Inset.
PRESENTATION MODE: Chooses presentation mode. Head-up, north-up,
course-up and true motion (requires ship’s speed and heading data) are
available, and the default setting is head-up.