Filter
Top Products
9. OTHERS MENU
9-6
9.5 INITIAL SETTING menu
9.5.1 Opening the INITIAL SETTING menu
This menu provides 10 sub menus which perform such tasks as mark
configuration and size.
1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select INITIAL SETTING and press the [MENU] key.
4. Select YES and press the [MENU] key to confirm the CAUTION indicated.
The following menu appears.
INITIAL SETTING
OTHERS
MENU QUIT
QUIT
QUIT
MARK DISPLAY...
MARK SIZE...
DATA DISPLAY...
CURRENT VEC & WIND...
NET SONDE SETTING...
NET SHOOT SETTING...
TARGET LOCK...
STABILIZATION...
TEST...
INITIALIZATION...
INITIAL SETTING menu
The TARGET LOCK menu is described in section 2.11. For the TEST menu, see
to Chapter 11.
9.5.2 INITIAL SETTING menu description
MARK DISPLAY menu
This menu turns on/off marks on the horizontal display. All items except DATA
ON TRACK are turned on in the default setting.
INITIAL SETTING
OTHERS
MENU QUIT
QUIT
HEADING MARK : ON
RANGE RINGS : ON
BEARING SCALE : ON
SHIP'S TRACK : ON
DATA ON TRACK : OFF
NET MOVEMENT PLOT : ON
FISH MARK CONNECT : ON
TARGET VECTOR : ON
FISH TRACK PLOT : ON
FISH HISTOGRAM : ON
QUIT
MARK DISPLAY
QUIT
MARK DISPLAY menu