Filter
Top Products
2. HORIZONTAL MODE
2-34
2.13.2 How to select a presentation mode
1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select DISPLAY SETTING and press the [MENU] key.
DISPLAY SETTING
DISPLAY MODE...
MODE SELECTION : MODE KEY
TX/RX MODE : ALTERNATIVE
H2/S DISPLAY : LANDSCAPE
PRESENTATION MODE :HEAD UP
TM DISPLAY RANGE :1.6R
BEARING REF : SHIP HEADING
TILT LEVER : TILT
S AUTO OFF CENTER : OFF
H-SLICE WIDTH : 16
H-SLICE PICT ADVC : KP SYNC
NET COURSE MARK : ENTER
MANUAL DEGAUSS : EXECUTE
AUTO DEGAUSS : INT SENSOR
DIMMER : 10
KEY BEEP VOLUME : 5
OTHERS
MENU QUIT
QUIT
QUIT
DISPLAY SETUP menu
4. Select PRESENTATION MODE and press the [MENU] key to open the dialog
box.
CANCEL
HEAD UP
NORTH UP
COURSE UP
TRUE MOTION
QUIT
Presentation mode dialog box
5. Select presentation mode desired and press the [MENU] key.
6. Select QUIT and press the [MENU] key.
7. Select QUIT at the top of the menu screen and press the [MENU] key to quit
all menus.
Note: The true motion display range may be set to 1.3 or 1.6 times the range
with TM DISPLAY RANGE on the DISPLAY SETTING sub menu.