Filter
Top Products
WATLOW Series 988 User’s Manual 4.29
Setup Menus, Chapter 4
Setup-Output
Alarm 4 Side
Select what triggers alarm 4.
• [both] triggers an alarm when the signal ≤ [A4LO] or ≥ [A4HI].
• [HiGH] triggers an alarm when the signal ≥ [A4HI].
• [LOW] triggers an alarm when the signal ≤ [A4LO].
[A4Sd] This prompt appears only on controllers equipped with output 4
hardware for a relay (98_ _-_ _ _ _-_B_ _, 98_ _-_ _ _ _-_D_ _ ,
98_ _-_ _ _ _-_E_ _ or 98_ _-_ _ _ _-_K_ _) or switched dc (98_ _-_ _ _ _-_C_ _)
and with [`Ot4] set to [`AL4] or [AL4n].
Default
↓
[BOTH] [HIGH] [LOW]
[A4SD] [A4SD] [A4SD]
˜
NOTE:
See Chapter 7 for
more information
on alarms.
[A4Sd]