ZyXEL Communications NWA-3500 Marine Radio User Manual


 
Chapter 6 Tutorial
NWA-3500/NWA-3550 User’s Guide
102
1 To set your NWA in secondary controller AP mode, open the Controller >
Redundacy screen (this screen only appears when the NWA is in Controller AP
mode) in the Web Configurator of the NWA that you want to serve as backup.
Figure 64 Tutorial: Secondary Controller AP
2 Enable Redundancy. Then select Secondary AP Controller and click Apply.
6.5.4.2 Primary AP Controller
The primary controller AP manages the NWA APs (in managed AP mode) in your
network. Changes made in the Web Configurator of the NWA primary AP controller
are synchronized automatically with the secondary controller AP (if there is one)
and the members of the managed AP list.
1 To set your NWA in primary controller AP mode, open the Controller >
Redundacy screen (this screen only appears when the NWA is in Controller AP
mode) in the Web Configurator of the NWA that you want to serve as the main
controller.
Figure 65 Tutorial: Primary Controller AP
2 Enable Redundancy. Then select Primary AP Controller and enter the IP
address of the secondary controller AP (required). Click Apply.
Note: Only NWAs in managed AP mode are visible to the controller AP.