Chapter 9 SSID Screen
NWA-3500/NWA-3550 User’s Guide
142
9.3 What You Need To Know
When the NWA is set to Access Point, AP + Bridge or MBSSID mode, you need
to choose the SSID profile(s) you want to use in your wireless network (see
Chapter 1 on page 31 for more information on operating modes).
To configure the settings of your SSID profile, you need to know the Media Access
Control (MAC) addresses of the devices you want to allow access to it.
Each SSID profile references the settings configured in the following screens:
• Wireless > Security (one of the security profiles).
• Wireless > RADIUS (one of the RADIUS profiles).
• Wireless > MAC Filter (the MAC filter list, if activated in the SSID profile).
• Wireless > Layer 2 Isolation (the layer 2 isolation list, if activated in the
SSID profile).
• Also, use the VLAN screen to set up wireless VLANs based on SSID.
Configure the fields in the above screens to use the settings in an SSID profile.
Refer to Section 8.3 on page 120 for pertinent information related to the screens
in thsi chapter.