Filter
Top Products
Chapter 23 Maintenance
NWA-3500/NWA-3550 User’s Guide
274
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default NWA IP
address (192.168.1.2). See your Quick Start Guide for details on how to set up
your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
Figure 183 Configuration Upload Error
23.8.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration
information and returns the NWA to its factory defaults as shown on the screen.
The following warning screen will appear.
Figure 184 Reset Warning Message
You can also press the RESET button to reset your NWA to its factory default
settings. Refer to Section 2.2 on page 37 for more information.
23.9 Restart Screen
Use this screen to restart the NWA without turning it off and on.