Chapter 3 Status Screens
NWA-3500/NWA-3550 User’s Guide
44
3.1.1 AP List
Click the AP List link the Status screen when the NWA is in AP controller
management mode.
Figure 14 Status > AP List
The following table describes the labels in this screen.
Show Statistics This link is not available when the NWA is in AP controller
management mode.
Click this link to view port status and packet specific statistics.
See Section 23.4.1 on page 266.
Association List Click this to see a list of wireless clients currently associated to
each of the NWA’s wireless modules. See Section 23.5 on page
268.
Channel Usage This link is not available when the NWA is in AP controller
management mode.
Click this to see which wireless channels are currently in use in
the local area. See Section 23.6 on page 269.
SSID Information This link is available only when the NWA is in AP controller
management mode.
Click this link to view the security mode and the number of the
connected wireless clients for the active SSID(s) on the NWA.
Logs Click this to see a list of logs produced by the NWA. See Section
19.6 on page 232.
Rogue AP List Click this to see a list of unauthorized access points in the local
area. See Section 15.3.3 on page 184.
Table 4 The Status Screen
LABEL DESCRIPTION
Table 5 Status > AP List
LABEL DESCRIPTION
AP Description This is the descriptive name configured for this AP in the
Controller > AP List.
Model This is the model name of the AP.
Radio MAC This is the MAC address of each wireless module.
802.11 Mode This is the wireless standard supported by each wireless module
on the AP.