Filter
Top Products
Chapter 6 Tutorial
NWA-3500/NWA-3550 User’s Guide
95
3 Click the Layer-2 Isolation tab. When the Layer-2 Isolation screen appears,
select L2Isolation03’s entry and click Edit. The following screen displays.
Figure 58 Tutorial: Layer-2 Isolation Edit
Enter the network switch’s MAC Address and add a Description (“NET_SWITCH”
in this case) in Set 1’s entry.
Enter server 1’s MAC Address and add a Description (“SERVER_1” in this case)
in Set 2’s entry.
Change the Profile Name to “L-2-ISO_SERVER_1” and click Apply. You have
restricted users on the SERVER_1 network to access only the devices with the
MAC addresses you entered.
4 Click the MAC Filter tab. When the MAC Filter screen appears, select
macfilter03’s entry and click Edit.
Enter the MAC address of the device Alice uses to connect to the network in Index
1’s MAC Address field and enter her name in the Description field, as shown in
the following figure. Change the Profile Name to “MacFilter_SERVER_1”. Select
Allow Association from the Filter Action field and click Apply.
Figure 59 Tutorial: MAC Filter Edit (SERVER_1)
You have restricted access to the SERVER_1 network to only the networking
device whose MAC address you entered. The SERVER_1 network is now
configured.