ZyXEL Communications NWA-3500 Marine Radio User Manual


 
Chapter 22 Dynamic Channel Selection
NWA-3160 Series User’s Guide
263
DCS Client Aware Select Enable to have the NWA wait until all connected clients
have disconnected before switching channels.
If you select Disable then the NWA switches channels
immediately regardless of any client connections. In this
instance, clients that are connected to the AP when it switches
channels are dropped.
DCS Allow Channel List
(2.4G only)
Select the range of non-overlapping channel numbers for
which you want the NWA to scan and subsequently use if
available.
DCS DFS Channel
Aware (5G only)
Select Enable to allow the NWA to broadcast on unused radar
channels. If you select Disable to turn the feature off. See
Section 8.4 on page 123 for more information on dynamic
frequency.
Apply Click this to save your changes to the NWA.
Reset Click this to return this screen to its last-saved settings.
Table 83 Load Balancnig
FIELD DESCRIPTION