Filter
Top Products
Chapter 12 Layer-2 Isolation Screen
NWA-3500/NWA-3550 User’s Guide
168
Note: When configuring this screen, remember to select the correct layer-2 isolation
profile in the Wireless> SSID > Edit screen of the relevant SSID profile.
Figure 104 Wireless > Layer-2 Isolation > Edit
The following table describes the labels in this screen.
Table 49 Wireless> Layer-2 Isolation > Edit
LABEL DESCRIPTION
Profile Name Type a name to identify this layer-2 isolation profile.
Allow devices
with these MAC
addresses
These are the MAC address of a wireless client, AP, computer or router.
A wireless client associated with the NWA can communicate with
another wireless client, AP, computer or router only if the MAC
addresses of those devices are listed in this table.
Index This is the index number of the MAC address.
MAC Address Type the MAC addresses of the wireless client, AP, computer or router
that you want to allow the associated wireless clients to have access to
in these address fields. Type the MAC address in a valid MAC address
format (six hexadecimal character pairs, for example
12:34:56:78:9a:bc).
Description Type a name to identify this device.