Filter
Top Products
Chapter 20 VLAN
NWA-3500/NWA-3550 User’s Guide
246
1Using the Remote Access Policy option on the Internet Authentication Service
management interface, create a new VLAN Policy for each VLAN Group defined in the
previous section. The order of the remote access policies is important. The most specific
policies should be placed at the top of the policy list and the most general at the bottom.
For example, if the Day-And-Time Restriction policy is still present, it should be moved to
the bottom or deleted to allow the VLAN Group policies to take precedence.
1a 1. Right click Remote Access Policy and select New Remote Access
Policy.
1b Enter a Policy friendly name that describes the policy. Each Remote Access
Policy will be matched to one VLAN Group. An example may be, Allow - VLAN
10 Policy.
1c Click Next.
Figure 152 New Remote Access Policy for VLAN Group
2 The Conditions window displays. Select Add to add a condition for this policy to
act on.
3 In the Select Attribute screen, click Windows-Groups and the Add button.
Figure 153 Specifying Windows-Group Condition