Filter
Top Products
Chapter 6 Tutorial
NWA-3500/NWA-3550 User’s Guide
88
5 Save the friendly AP list somewhere it can be accessed by all the other access
points on the network. In this example, save it on the network file server (E in
Figure 47 on page 84). The default filename is “Flist”.
Figure 52 Tutorial: Save Friendly AP list
6.3.2 Activate Periodic Rogue AP Detection
Take the following steps to activate rogue AP detection on the first of your NWAs.
1 In the ROGUE AP > Configuration screen, select Enable from the Rogue AP
Period Detection field.
Figure 53 Tutorial: Periodic Rogue AP Detection
2 In the Period field, enter how often you want the NWA to scan for rogue APs. You
can have the NWA scan anywhere from once every ten minutes to once every
hour. In this example, enter “10”.
3 In the Expiration Time field, enter how long an AP’s entry can remain in the list
before the NWA discards it from the list when the AP is no longer active. In this
example, enter “30”.