Chapter 4 Management Mode
NWA-3500/NWA-3550 User’s Guide
51
Manual AP Controller
IP
Check this is you know the IP address of the controller AP that
you want to manage this AP.
• Primary AP Controller IP - Enter the IP address of the
primary controller AP.
• Secondary AP Controller IP - Enter the IP address of the
secondary controller AP.
Apply Click this to save your changes.
Note: If you change the mode in this screen, the NWA
restarts. Wait a short while before you attempt to log in
again. If you changed the mode to Managed AP, you
cannot log in as the web configurator is disabled; you
must manage the NWA through the management AP
on your network.
Reset Click this to return this screen to its previously-saved settings.
Table 8 The Management Mode Screen
LABEL DESCRIPTION