Filter
Top Products
Chapter 7 System Screens
NWA-3500/NWA-3550 User’s Guide
116
7.6 Configuring Time Setting
To change your NWA’s time and date, click SYSTEM > Time Setting. The screen
appears as shown. Use this screen to configure the NWA’s time based on your
local time zone.
Figure 75 System > Time Setting
The following table describes the labels in this screen.
Table 25 System > Time Setting
LABEL DESCRIPTION
Current Time This field displays the time of your NWA.
Each time you reload this page, the NWA synchronizes the time
with the time server (if configured).
Current Date This field displays the last updated date from the time server.
Manual Select this radio button to enter the time and date manually. If you
configure a new time and date, time zone and daylight saving at
the same time, the time zone and daylight saving will affect the
new time and date you entered.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or
the last time configured manually.
When you set Time and Date Setup to Manual, enter the new
time in this field and then click Apply.