Filter
Top Products
Chapter 7 System Screens
NWA-3500/NWA-3550 User’s Guide
113
7.5 Configuring the Password
It is strongly recommended that you change your NWA’s password. Click SYSTEM
> Password. The screen appears as shown.
If you forget your NWA’s password (or IP address), you will need to reset the
device. See the section on resetting the NWA for details
First DNS Server
Second DNS
Server
Third DNS Server
Select From DHCP if your DHCP server dynamically assigns DNS
server information (and the NWA's Ethernet IP address). The field to
the right displays the (read-only) DNS server IP address that the
DHCP assigns.
Select User-Defined if you have the IP address of a DNS server.
Enter the DNS server's IP address in the field to the right. If you
chose User-Defined, but leave the IP address set to 0.0.0.0, User-
Defined changes to None after you click Apply. If you set a second
choice to User-Defined, and enter the same IP address, the second
User-Defined changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do
not configure a DNS server, you must know the IP address of a
machine in order to access it.
The default setting is None.
Apply Click Apply to save your changes.
Reset Click Reset to reload the previous configuration for this screen.
Table 23 System > General
LABEL DESCRIPTION