Filter
Top Products
Chapter 6 Tutorial
NWA-3500/NWA-3550 User’s Guide
97
1 Click WIRELESS > Wireless. Check that the Operating Mode is MBSSID and
that the correct SSID profiles are selected and activated, as shown in the following
figure.
Figure 60 Tutorial: SSID Profiles Activated
2 Next, click the SSID tab. Check that each configured SSID profile uses the correct
Security, Layer-2 Isolation and MAC Filter profiles, as shown in the following
figure.
Figure 61 Tutorial: SSID Tab Correct Settings
If the settings are not as shown, follow the steps in the relevant section of this
tutorial again.