Filter
Top Products
Chapter 16 Remote Management Screens
NWA-3500/NWA-3550 User’s Guide
194
16.7 The SNMP Screen
Use this screen to have a manager station administrate your NWA over the
network. To change your NWA’s SNMP settings, click REMOTE MGMT > SNMP.
The following screen displays.
Figure 123 Remote MGNT > SNMP
The following table describes the labels in this screen.
Table 60 Remote MGNT > SNMP
LABEL DESCRIPTION
SNMP Configuration
Get Community Enter the Get Community, which is the password for the incoming
Get and GetNext requests from the management station. The default
is public and allows all requests.
Set Community Enter the Set community, which is the password for incoming Set
requests from the management station. The default is public and
allows all requests.
Community Type the trap community, which is the password sent with each trap
to the SNMP manager. The default is public and allows all requests.
Trap Destination Type the IP address of the station to send your SNMP traps to.
SNMP Version Select the SNMP version for the NWA. The SNMP version on the NWA
must match the version on the SNMP manager. Choose SNMP version
1 (SNMPv1), SNMP version 2 (SNMPv2) or SNMP version 3
(SNMPv3).
Trap Community Type the trap community, which is the password sent with each trap
to the SNMP manager. The default is “public” and allows all requests.
This field is available only when SNMPv1 or SNMPv2 is selected in
the SNMP Version field.